Calibration Services

Electrical

DC Voltage 100nV – 30kV    DC Current 10nA – 1000A 

AC Voltage 1mV – 10kV       DC Current 30µA – 1000A

                                @   Frequencies  from 5Hz – 1GHz* 

Resistance from 0.001 Ohm – 10 TOhm

Frequency from 5Hz – 1GHz   Period from 500pSec – 5Sec

Equipment Types :- Multimeters, Ammeters, Voltmeters, Clamp Meters, Tachometers, Resistance Meters,  L.C.R. Meters, Watt Meters, Power Meters, Power Analysers, Frequency Meters, Phase Angle Meters, Function Generators, Voltage Calibrators,

Current Calibrators, Oscilloscopes, Spectrum Analysers, Curve Tracers.  * Dependent on Amplitude

Pressure

     Gas Gauges and Transducers from 1mbar – 200bar Absolute or Gauge Hydraulic Gauges and Transducers from 10mbar – 700bar Gauge Barometric           * Pressure from 800mbar – 1500mbar

*If required we can calculate the Barometric Pressure at your site for any given day

and this can be transmitted by e-mail, Fax or Telephone.

Temperature

  Temperature Probes :- Thermocouples, Platinum Resistance Detectors and Thermistors from –40°C to 1200°C

Digital and Analogue Indicators, Chart Recorders, Dry Block Calibrators, Infra-Red and Mercury in Glass Thermometers

Dimensional

    Plain gap gauges (parallel)

    Thread measuring cylinders

    Plain plug gauges (parallel) cylindrical setting standards and rollers

    Plain plug gauges (taper)

    Plain ring gauges (parallel) and setting standards

    Plain ring gauges (taper)

    Plain gap gauges (parallel)

    Length gauges, flat and spherical ended (up to 300mm / 12 ins)

    Screw plug gauges (parallel) including check and setting plugs

    Screw plug gauges (taper) including check plugs

    Screw ring gauges (parallel)

    Screw thread adjustable caliper gauges (parallel) (by gauge block only)

    Vee blocks

    Engineer’s parallels

    Graticules and linear scales

    Squares: Blade type, Cylindrical, & Block

    Sine bars and tables

    Right angle and box angle plates

    Straightedges: Cast iron, Steel and granite

    Steel balls, Tungsten carbide balls

    Micrometers: External, Internal, Depth

    Bore micrometer (three point) [from 16mm to 200mm at any point within the measuring range)

    Indicating micrometers

    Height setting micrometer & riser blocks

    Micrometer heads

    Bench micrometer

    Bevel protractors & combination sets

    Vernier caliper, height and depth gauges

    Dial gauges and dial test indicators

    Comparators (external)

    Spirit levels

    Electronic indicating levels

    Feeler gauges

    Paint thickness setting foils

Humidity

Humidity Meters        :- Three point calibration @ 10, 50 and 95%

pH & Conductivity

pH Meters                 :- Three point calibration @ 4.00, 7.00, and 10.00pH

Conductivity Meters :- Four point calibration @ 84, 1413, 5000 and 12880µS/cm

Gas Detector/Analysts

Combustion Analysers, Personal Safety Gas Detectors and Flue Gas Analysers

Light Meters

Illuminance in Lux/footcandles  0 – 100,000 Lux  0 – 19000 Footcandles

Torque

Analysers, Wrenches and Screwdrivers

Airflow

Pitot Tube,Vane and Hot Wire Anemometers Ventilation Apertures

Mass

Calibration Weights and Measuring Weights  0.01gram – 50kgram

Scales/Balances

Analogue/Digital Platform, Industrial, Hanging and Crane Scales, Analogue/Digital Precision Balances

Force Gauges

Digital Tension/Compression Force Gauges and Load Cells